Brick, Cement & Steel Material Calculator

Instant · no signup needed

A quick, general estimate of cement, steel, and bricks needed for the grey structure of a building, based on published Pakistani construction cost guides. Enter your total covered area to see approximate quantities — useful for an early budgeting conversation with a contractor or supplier, though your structural engineer's bill of quantities will always be the authoritative figure for your specific design.

Covered area (grey structure)

Total covered area (sq ft)

Cement0 bags

Steel / reinforcement0 tons

Bricks0

General industry approximations for grey structure (cement ≈ 0.40 bags/sq ft, steel ≈ 3.2 kg/sq ft, bricks ≈ 24/sq ft), compiled from published Pakistani construction cost guides — not project-specific figures. Actual quantities depend on structural design, foundation depth, and soil conditions; always confirm the exact bill of quantities with your structural engineer.

Prefer a real answer, not a calculator?

Book a free site visit

Tell us your preferred date and time, and we'll confirm a slot to visit your plot or discuss your project in person — no obligation.

Worked Lahore Example: Material Bill for a 3,300 sq ft Residence.

BOQ material estimation.

Structural engineers apply empirical site multipliers when preparing the Bill of Quantities for a standard 10 Marla house in Lahore (3,300 sq ft covered area). Entering 3,300 sq ft into our material estimator computes the three primary procurement volumes below.

Engine Output (3,300 sq ft Covered Area).

Cement Required: 1,320 bags (at 0.40 bags/sq ft across foundation, pillars, beams, and slabs).
Deformed Steel Rebar: 10.56 tons (at 3.2 kg/sq ft, specified as 60-grade deformed bar).
Clay Bricks: 79,200 bricks (at 24 bricks/sq ft for exterior and partition walls).

Procurement Staging on Site.

To avoid moisture damage on Lahore sites, DKA recommends purchasing the 1,320 cement bags in rolling batches of 200 bags (Maple Leaf or Bestway OPC). Bricks arrive in 10,000-unit tractor trolleys directly from Raiwind or Multan Road kilns with sharp edges and ringing resonance. Steel should be bundled in designated beam and slab tonnage lots.

Frequently asked questions

How accurate are these material quantities?+

These are general industry approximations (cement ≈ 0.40 bags/sq ft, steel ≈ 3.2 kg/sq ft, bricks ≈ 24/sq ft) compiled from published Pakistani construction cost guides — not project-specific figures. Actual quantities depend on structural design, foundation depth, and soil conditions, so always confirm the exact bill of quantities with your structural engineer.