A 10 marla plot gives a house room for a proper drawing room, a double car porch and a lawn, without the running costs of a kanal. These are 10 marla houses from our own work: one designed and built turnkey, and one existing house fully renovated.
These are 3D elevation renders produced by the studio for its own projects. Open the full portfolio for every project.
Planning a 10 marla house
A 10 marla plot is 2,250 sq ft in DHA, Bahria Town and most planned Lahore societies, which count a marla as 225 sq ft (commonly a 35 × 65 ft plot). On the traditional 272.25 sq ft marla, used in older areas and land records, it is 2,722.5 sq ft. Check your allotment letter or site plan for the exact figure, or use the marla to square feet converter.
At this size the ground floor can separate guests from family: a drawing room and dining near the entrance, a family lounge and kitchen behind, and a ground-floor bedroom for parents or guests. The first floor usually takes three bedrooms with attached baths and a family sitting area. A double-height entrance or lounge becomes possible, at the price of first-floor area, and that trade-off is one of the first decisions in the design.
If you already own a 10 marla house, renovation is the other route: the structure is assessed, the plan is reworked and the house is refinished, as in the renovation project above.
What you receive
Concept design and space planning around how your family lives
Floor plans and front elevation design
3D visualization of the exterior, and interiors where included
Working drawings, with structural, electrical and plumbing coordination
If you want one team for design and construction, the turnkey level adds grey structure, finishing and interiors on a single contract.
How long it takes
By phase
Phase
Typical duration
Design
3–4 weeks
Working drawings
2–3 weeks
Grey structure
4–6 months
Finishing
2–3 months
Turnkey (design + build)
8–12 months
Durations vary with project size, scope, approvals, material selections and site conditions.
Planning a 10 marla house?
Send us your plot details
Send your plot size, location and what you want built. Danial Khan reviews every enquiry personally and replies with the next step.
2,250 sq ft in DHA, Bahria Town and most planned Lahore societies, which count a marla as 225 sq ft; a common plot shape is 35 × 65 ft. On the traditional 272.25 sq ft marla it is 2,722.5 sq ft.
Yes. Floor plans, the front elevation, 3D visualization and working drawings are all part of the design stage.
Yes. Our portfolio includes a full 10 marla renovation in which the house was replanned, restructured and refinished.
